Cayenne GTS (9PA) V8-4.8L (2008)
2. Carefully unscrew oxygen sensor at the exhaust manifold. -1- Use a short open-ended wrench if necessary and tap loose with a hammer.
Cylinder bank 5 to 8
CAUTION:
The oxygen sensor cable can be damaged if twisted.
-
Change in emissions.
-
Check Engine light comes on.
-
Always expose oxygen sensor cable so that the wire can turn when unscrewing or screwing in the sensor.
-
Do not kink cable.
1. Disconnect cable plug on oxygen sensor and release cable around the exhaust manifold.