porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

ABOUT US
Removing and Installing Central Electrical System Power Distributor|Page 242 > < Removing and Installing Central Electrical System Power Distributor|Page 240

Cayenne GTS (9PA) V8-4.8L (2008)

Page 3
background image

14. Release connector -Arrow A- and remove from charging relay -Arrow B-.

15. Release charging relay bracket -Arrows A- and remove it -Arrow B-.

16. Release relay carrier with a small screwdriver -Arrows A- and remove -Arrow B-.

17. Release relay carrier with a small screwdriver -Arrows A- and remove -Arrow B-.
18. Cut tie-wraps -C- and remove lines -Arrows D-.

19. Remove plug connection (Tyco switch) from bracket -Arrow A-.
20. Cut tie-wrap -B-.
21. Release plug connection -Arrow C- and disconnect -Arrows D-.

Removing and Installing Central Electrical System Power Distributor|Page 242 > < Removing and Installing Central Electrical System Power Distributor|Page 240