Cayenne GTS (9PA) V8-4.8L (2008)
1 - Guide tube
2 - O-ring
3 - Screw, M6 x 16
4 - Oil dipstick
5 - O-ring
6 - Screw, M6 x 25; timing-case cover to oil guide housing
7 - Oil level sensor
8 - O-ring
9 - Joint flange
10 - Screw, M6 x 20
11 - Screw, M6 x 16
A - Direction of travel
4. Remove deflection roller between the vibration balancer and the generator. To do this, use a small screwdriver to pry off the lid and loosen the
screw. Remove deflection roller with screw. -1-
Belt drive
1 - Deflection roller
2 - Hydraulic belt tensioner; tensioner to lever
3 - Screw, M8 x 96; complete lever to timing-case cover and cylinder head
4 - Deflection roller
5 - Dual poly-V-belt
Removing oil pressure sensor
1. Pull off cable plug for oil pressure sensor.
2. Place a cloth around the components. Collect dripping oil.
3. Remove oil pressure sensor (oil pressure sender) with adapter -3 and 1-. To do this, remove the two screws -4- and pull the components straight
off. Replace sealing rings.