Cayenne GTS (9PA) V8-4.8L (2008)
3. Turn union nut using a narrow plastic spatula, for example, or using the special wrench T10152 tool and unscrew the ring from the ignition starter
switch.
4. Press ignition switch inwards and remove towards the bottom.
5. Press connector -arrow- and pull off from ignition starter switch.
Installing ignition switch
1. Connect the connector to the ignition starter switch until it engages firmly.
2. Position ignition starter switch in the dashboard. Position union nut, re-adjust switch and tighten union nut using wrench T10152. - Tightening
torque: 1 ftlb.
3. Check clips on the moulding for the dashboard for damage and replace if necessary.