porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Fuse Element In Power Distributor|Page 3055 > < Removing and Installing Fuse Element In Power Distributor|Page 3053
Page 4
background image

5. Move the seat in its folded position towards the rear -arrow A- and then tip forward -arrow B-.
6. Screw in fastening screws -arrows 1-. - Tightening torque: 33 ftlb.
7. Clip in front seat trim -arrow C-.

Subsequent work

Carry out work instruction after disconnecting the battery.

Removing and Installing Fuse Element In Power Distributor|Page 3055 > < Removing and Installing Fuse Element In Power Distributor|Page 3053