Cayenne GTS (9PA) V8-4.8L (2008)
30. Mount ground strap together with the twist lock on the stud and screw down with the fastening nut -1-. - Tightening torque: 6.5 ftlb.
31. Push the plug connection for the bonnet wire harness together -arrow A- until it is felt to engage.
32. Push the plug connection for the bonnet wire harness onto the retaining clips -arrow B- until it is felt to engage.
Installing intake pipe on the heating/fresh air unit
1. Position intake manifold and secure with both fastening nuts -1-. - Tightening torque : 4.5 ftlb.
2. Close both retaining clips in the intake manifold -arrow A-.
3. Insert air inlet grille -arrow B-.
4. Clip in wire harness to intake manifold -arrow C- and insert wire harness retaining clips on intake manifold -arrow D-.
Installing support for DME control module
1. Position support for DME control module and screw down both fastening nuts -3- and the fastening screw -2-. - Tightening torque: 6 ftlb -
Tightening torque: 6 ftlb.
2. Insert DME control module in the retaining clips -arrow A- and close the retaining clips -arrow B-.