Cayenne GTS (9PA) V8-4.8L (2008)
19. Plug in connector on left lateral acceleration sensor -24- and circulating pump connector -23-.
19.1. Plug in connector on lateral acceleration sensor in left wheel housing -arrow A- until the connector engages securely.
19.2. Plug in connector on circulating pump -arrow B- until the connector engages securely.
19.3. Route wire harness and clip it in on the left wheel housing with the three retaining clips -arrows C-.
20. Connect plug connection for ABS sensor and brake pad wear indicator at the left and right -21 and 22-.
20.1. Route wire harness and clip it in on the left and right wheel housing with the retaining clips -arrow A-.
20.2. Clip in connector socket for ABS sensor and brake pad wear indicator -arrow B-.
20.3. Connect plug connection for ABS sensor and brake pad wear indicator -arrow C- until the plug connection engages securely.
21. Connect plug connection on tank for windscreen washer system -20- until the plug connection engages securely.
22. Plug in connector for additional heating -19- until it engages securely.
23. Plug in connector on servo valve -18- until it engages securely.
24. Plug in connector on angle sensor for headlight levelling system at the left and right -16 and 17-.
24.1. Plug in connectors on angle sensor for headlight levelling system -arrow A- until the connectors engage securely.
24.2. Secure wire harness on the left side to the refrigerant line with a new tie-wrap -arrow B-.
25. Plug in connector on TPM transmitter (trigger) -14 and 15- until it engages securely.