porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Procedures|Page 3196 > < Procedures|Page 3194
Page 38
background image

1. Push in latch -b- on connector for sensor -a- until it is felt to engage -Arrow A-.
2. Release locking mechanism latch -b- -Arrow B- and pull connector off the sensor -a- -Arrow C-.
3. Remove line together with lock carrier support -Arrow D-.

4. Turn bulb holder (wheel housing) slightly and remove -Arrow A-.

Only for vehicles with tyre pressure monitoring system

5. Release connector on antenna for tyre pressure monitoring system -Arrow B- and pull it off -Arrow C-.

Remove front apron.

6. Release plug connection to front apron -Arrow A- and disconnect -Arrow B-.
7. Unscrew fastening nut -1- (front side member wheel housing) and remove ground straps together with twist lock -a- -Arrow C-.
8. Open clip -Arrow D- and remove line -Arrow E-.

9. Release connector on headlight housing -Arrow A- and pull it off -Arrow B-.

10. Open clips -Arrows C- and remove line -Arrows D-.

Only for vehicles with automatic headlight levelling system.

Procedures|Page 3196 > < Procedures|Page 3194