porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Procedures|Page 3203 > < Procedures|Page 3201
Page 45
background image

24. Push on connector of lateral acceleration sensor (wheel housing) -Arrow A- until locking tab -B- is felt to engage.
25. Place line in installation position -Arrow C- and close clip -Arrow D- until locking tab is felt to engage.

Only for vehicles with automatic headlight levelling system

26. Push connector onto angle sensor (wheel suspension) -Arrow A- until locking tabs -B- are felt to engage.

27. Connect plug to washer-fluid reservoir -Arrows A- until locking lug -B- is felt to engage.
28. Insert line into bracket -Arrow C-.

29. Push connector onto headlight housing -Arrow A- until locking tab -B- is felt to engage.
30. Place lines in installation position -Arrows C- and close clips -Arrows D- until locking tabs are felt to engage.

31. Push connector onto airbag sensor -Arrow A- until the latch is felt to engage.
32. Push line and holder onto lock carrier -Arrow B-.

Fit front apron.

Procedures|Page 3203 > < Procedures|Page 3201