porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Procedures|Page 3228 > < Procedures|Page 3226
Page 70
background image

14. Remove line -a- and (only in cars with additional heating) -b- on corrugated hose holders (transmission tunnel) from threaded bolts -Arrows A-.
15. Press out the rubber sleeve to the inside -Arrow B-.

Only for vehicles with level adjustment.

16. Remove right centre cover
17. Release the two connectors (underbody right) -Arrows A- and remove them -Arrows B-.
18. Unclip line -Arrow C- and press rubber sleeve up and out -Arrow D-.
19. Lower the vehicle.

20. Press down lock on connector (head airbag) -Arrow A- and maintain in this position.
21. Release connector -Arrow B- and pull off -Arrow C-.
22. Unclip line -Arrow D-.

23. Release connector on lateral acceleration sensor (luggage compartment right) -Arrow A- and disconnect plug connection -Arrows B-.
24. Unclip line -Arrow C-.
25. Press out rubber sleeve and remove line to carbon canister and to leak diagnosis pump -Arrow D-.

26. Remove connector -Arrows A- (D-pillar lower right) and unclip connector bracket -Arrows B-.
27. Unscrew fastening nut -1- and remove ground straps together with twist lock -a- -Arrow C-.

Procedures|Page 3228 > < Procedures|Page 3226