Cayenne GTS (9PA) V8-4.8L (2008)
10. Remove rubber sleeve -8- on the centre firewall.
10.1. Unclip wire harness for brake booster from the centre firewall at the retaining clip -arrow A-.
10.2. Remove rubber sleeve on the centre firewall in direction of the engine compartment -arrow B- and remove wire harness for brake booster.
Installing wire harness for brake booster
1. Remove rubber sleeve -8- on the centre firewall.
1.1. Push wire harness for brake booster through from the engine compartment towards the interior - arrow A- and fit rubber sleeve on the centre
firewall.
1.2. Clip in wire harness for brake booster on the centre firewall with the retaining clip -arrow B-.
2. Secure wire harness on the centre firewall.
2.1. Insert wire harness into the two holders -arrows A- and close the holders -arrows B-.