Cayenne GTS (9PA) V8-4.8L (2008)
8. Pull down wire harness on upper side member from the four clips -arrows A-.
9. Unclip wire harness on the two retaining clips -arrows B-.
10. Pull off connector on angle sensor for HBA -7-.
10.1. Release connector on angle sensor for HBA on the left wheel suspension -arrows A- and pull off - arrow B-.
10.2. Remove tie-wrap -arrow C- for securing the wire harness to the refrigerant line.
11. Pull off connector on servo valve -8-.
11.1. Release connector on servo valve -arrow A- and pull off -arrow B-.
12. Pull off plug connection for ABS sensor and brake pad wear indicator -9-.
12.1. Release plug connection for ABS sensor and brake pad wear indicator in left wheel housing -arrow A- and pull off -arrow B-.
12.2. Unclip socket for ABS sensor and brake pad wear indicator -arrow C-.
12.3. Unclip wire harness on the three retaining clips -arrows D-.