Cayenne GTS (9PA) V8-4.8L (2008)
6. Remove air cleaner housing.
7. Remove filler neck from reservoir for windscreen washer system.
8. Remove coolant reservoir.
Sub-part - removing front right wiring harness
Removing support for DME control module
1. Screw down fastening nut -1- and take off ground strap with the twist lock.
2. Open the retaining clips -arrow A- and take out the DME control module wire harness -arrow B-.
3. Unscrew the fastening screw -2- and the two fastening nuts -3- and take out the support for the DME control module.
Removing intake pipe on the heating/fresh air unit
1. Pull out wire harness retaining clips on the intake manifold -arrow A- and unclip the wire harness on the intake manifold -arrow B-.
2. Pull out air inlet grille -arrow C-.
3. Open both retaining clips in the intake manifold -arrow D-.
4. Unscrew the two fastening nuts -1- and remove the intake manifold.
Sub-part - removing front right wiring harness