Cayenne GTS (9PA) V8-4.8L (2008)
Cutting carpeted floor
4. Screw off fastening nuts -1- on the PDCC control unit.
Screwing off fastening nuts on control unit
5. Remove PDCC control unit holder.
5.1.
Remove PDCC control unit -1- from the studs and press it to one side -arrow A-.
5.2.
Screw off fastening nuts -2- on holder -3- and remove PDCC control unit holder -arrow B-.
Removing PDCC control unit holder
6. Remove PDCC control unit.
6.1.
Release connector -1- (-arrow A-) and pull it off the PDCC control unit -2- (-arrow B-).
6.2.
Remove PDCC control unit -2- (-arrow C-).