porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Hydraulic Pump|Page 3695 > < Removing and Installing Hydraulic Pump|Page 3693
Page 4
background image

4. Disconnect intake manifold at the air cleaner cover. Remove the air cleaner cover on the Cayenne S.

5. To do this, turn the -pins 180 degrees- and pull them out. Then pull off the intake manifolds.

6. Once the cover is removed, remove the intake manifold completely along with the clamp. To do so, disconnect the positive crankcase ventilation

pipe at the pressure pipe -arrow- and at the hydraulic pump -arrow- (clamp locks).

Removing and Installing Hydraulic Pump|Page 3695 > < Removing and Installing Hydraulic Pump|Page 3693