Cayenne GTS (9PA) V8-4.8L (2008)
/v8-4.8l/Page-703005.png)
2. Fit the four fastening screws -arrows-.
3. Carefully raise the air spring strut using a suitable -figure- lift with rubber base. Then, pull the wheel carrier downwards in order to fit the fastening
screw.
4. Attach the fastening screw for the connecting link/spring strut -arrow- to the wheel carrier.
5. For vehicles with PDCC (Porsche Dynamic Chassis Control), fit the protection cap on the valve block.
6. Connect the CDC sensor plug connection to the lower part of the spring strut -(arrow)-. Insert cable into the holders.
