Cayenne GTS (9PA) V8-4.8L (2008)
/v8-4.8l/Page-722008.png)
Marking and fitting top concave support with top support at correct position
^
For the right spring strut, the marking must be pointing in the direction of travel when installing the top concave support.
^
Position the top spring plate -arrow- precisely at the coil spring stop.
Top spring plate stop at coil spring
5. Once the concave support is positioned and aligned, the center lines -A- and -B- must be parallel. No. 1 -1- shows the connection of the connecting
rod from the stabilizer to the spring strut.
Concave support assembly
6. Once the mount is positioned, fit the new lock nut. Screw the lock nut onto the piston rod until approx. 1 to 2 threads are visible above the lock
nut. Then tighten with double-arm torque wrench 15 - 65 Nm (48 ftlb.) NR.93.
7. Complete the following steps to ensure that the protective sleeve (rear-axle spring strut in figure) -see figure- is seated correctly:
