Cayenne GTS (9PA) V8-4.8L (2008)
Removing front wheel bearing
Caution
Increased danger of accident when handling hydraulic presses.
^
Danger of crushing and material damage if the wheel carrier is raised improperly.
^
Watch out for parts falling when working with the hydraulic cylinder.
-> Do not raise the wheel suspension higher than the normal vehicle position (vehicle resting on wheels).
-> When raising the suspension, use a suitable intermediate layer (hard rubber).
-> Do not damage the brake cover plate.
-> Vehicle may not be moved if drive shafts have not been fitted and tightened.
Information
The wheel bearing is removed with the wheel bearing housing installed.
1. Remove the corresponding hub cap with puller hook 92291 and release the axle nut (fastening nut) before lifting the vehicle. Operate the brake
while doing so (2 fitters required).
2. Remove wheel.