Cayenne GTS (9PA) V8-4.8L (2008)
/v8-4.8l/Page-724005.png)
13. Insert the tubular piston cylinder vas 6178. Position the T10205/3 pressure piece (from attachments T10205) and the 8-2 nut for the threaded rod
(from attachments T10205). Press out the wheel hub.
It should be ensured that the separator is not pressing on the seat of the bearing inner race on the wheel hub.
14. If the wheel hub is used again, remove the -inner race of the wheel bearing- from the wheel hub. To do this, position the 12 - 115 mm [diameter]
separator NR.111 behind the inner race.
15. Press inner race off the wheel hub. To do this, position the T10205/2 bell (from attachments T10205 without the grip piece. Insert the tubular
piston cylinder vas 6178. Position the T10205/3 pressure piece (from attachments T10205) and the 8-2 nut for the threaded rod (from attachments
T10205).
