Cayenne GTS (9PA) V8-4.8L (2008)
/v8-4.8l/Page-741004.png)
7. Insert the T10205/2 bell (from attachments T10205) at the correct position in the groove provided.
8. Insert the tubular piston cylinder VAS 6178. Position the T10205/3 pressure piece (from attachments T10205) and the T10205/8-2 threaded nut
(from attachments T10205). Press out the wheel hub.
Ensure that the separating device does not press on the seat of the bearing inner race on the wheel hub.
9. If the wheel hub is used again, remove the inner race of the wheel bearing from the wheel hub. To do this, position the separating device 12 - 115
