Cayenne GTS (9PA) V8-4.8L (2008)
Fluid Line/Hose: Service and Repair
Removing and installing line for ATF cooling
Preliminary work
Preliminary work for line for ATF cooling
1. Remove front cardan shaft.
2. Remove engine carrier.
Installing line for ATF cooling
Overview of ATF line
1. Install ATF line.
2. Screw in ATF line screw connection to engine oil pan -> Tightening torque: 10 Nm (7.5 ftlb.) and to transmission bell housing -> Tightening
torque: 10 Nm (7.5 ftlb.).
3. Screw in fastening screw -arrow- which fastens ATF line to ATF thermostat. -> Tightening torque: 10 Nm (7.5 ftlb.)