Cayenne GTS (9PA) V8-4.8L (2008)
ATF pan
Warning
Hot fluid
^
Danger of scalding
-> Let the fluid cool down.
-> Wear personal protective gear.
Warning
Hot fluid
^
Danger of scalding
-> Let the fluid cool down.
-> Wear personal protective gear.
4. Unscrew oil inspection plug -2- and fill in ATF until a constant discharge is visible.
Oil drain plug and oil inspection plug
5. Screw in oil inspection plug -2- again with a new sealing ring. -> Tightening torque: 70 Nm (52 ftlb.)
Subsequent work
Reworking ATF pan
Information
^
Modified ATF filling capacities in the transmission in combination with new control units.
^
Observe -> "Technical Information 01104 Group 3" and numbers on transmission and control unit.
1. Check and if necessary, top off the ATF.
2. Install shield on ATF pan. To do this, tighten the two fastening screws -arrows-. -> Tightening torque: 10 Nm (7.5 ftlb.)