Cayenne GTS (9PA) V8-4.8L (2008)
that can enter the converter bell housing.
1. Fit new sealing ring on special tool assembly sleeve 3295.
2. Drive in sealing ring using special tool assembly sleeve 3295 -Arrow- until the special tool touches the transmission housing.
Installing sealing ring
Subsequent work
Reworking sealing ring for torque converter
1. Install torque converter.
Information
Plug used to seal converter opening
After installing a new sealing ring, the converter assembly opening must be sealed with a plug -1- (955.301.729.00). This reduces the amount of dirt
that can enter the converter bell housing.
2. Install transmission.