Cayenne GTS (9PA) V8-4.8L (2008)
/v8-4.8l/Page-443004.png)
Positioning sealing ring
2. Press new sealing ring with special tool pressure sleeve T10174 as far as the pressure sleeve on the transmission housing. -Arrow-
Driving in the sealing ring
3. Position selector lever on selector shaft and screw in fastening nut. -> Tightening torque: 15 Nm (11 ftlb.)
4. Attach tab washer -A- to the cable holder on the transmission side.
Selector lever cable to transmission
5. Press cable on the ball joint -Arrow-.
Subsequent work
Reworking for sealing ring for right selector shaft
1. Install multi-functional switch.
Reworking for sealing ring for left selector shaft
1. Fit engine guard.
