Cayenne GTS (9PA) V8-4.8L (2008)
3. When doing so, ensure that the opening for the adjusting screw -arrow- is turned upwards.
Cable adjustment
Installing selector lever cable
Information
^
When a new selector lever cable is used, this should be connected to the old cable immediately during removal. This ensures that it is routed
correctly.
Information
^
The cable adjustment must be changed when a new selector lever cable is used.
1. Install selector lever cable through the lower part of the selector frame.
2. Press rubber sleeve on the selector lever cable into the lower part of the selector frame.
Information
^
Ensure that the tab washer is seated correctly.
3. Attach tab washer -A- to the cable holder on the transmission side.
Selector lever cable connection to transmission
4. Attach cable to the ball joint -arrow-.