Cayenne GTS (9PA) V8-4.8L (2008)
Wiring Harness: Service and Repair
Removing and installing wire harness in transmission
Information about wire harness
Information about wiring harness
Overview of wiring harness
-1- - Shift solenoid valve (S1)
-2- - Plug connection for output shaft speed inductive pickup
-2a- - Cable routing for output shaft speed inductive pickup
-3- - Oil pressure switch 2 for transmission (omit in MY 2006)
-4- - Oil pressure switch 1 for transmission (omit in MY 2006)
-5- - Shift solenoid valve UK (modulation pressure)
-6- - Input shaft speed (turbine speed) inductive pickup
-7- - ATF temperature sensor
-8- - Modulation pressure solenoid valve (main)
-9- - Shift solenoid valve C1 (modulation pressure)
-10- - Shift solenoid valve C3 (modulation pressure)
-11- - Shift solenoid valve B1 (modulation pressure)
-12- - Shift solenoid valve C2 (modulation pressure)
-13- - Shift solenoid valve (S2)
Preliminary work for wire harness
Preliminary work for wiring harness
1. Remove ATF filter.