Cayenne GTS (9PA) V8-4.8L (2008)
Information
^
A second fitter is required for loosening/tightening the flange
3. Position marking on nut and drive shaft -arrow- again so that the rolling moment determined prior to removal is reached once again.
Marking nut on drive flange
Information
^
If the rolling moment has to be corrected, this should be done via the tightening torque of the nut.
4. Check rolling moment with special tool torque screwdriver for measuring friction moment NR.89. -> Rolling moment: 2.0 ftlb.-0.2 ftlb.+0.2 ftlb.)
Checking rolling moment
Subsequent work for sealing ring for cardan flange
Touching up sealing ring for cardan flange
1. Install rear cardan shaft.
2. Check the oil in the final drive.
Removing and Installing Sealing Ring for Output Flange
Removing and installing sealing ring for output flange