Cayenne GTS (9PA) V8-4.8L (2008)
/v8-4.8l/Page-474008.png)
Insert the wheel bearing with the magnetic multiple-pole ring to the drive shaft. Check the magnetic side (e.g., with a paper clip). Do not use magnets
or screw drivers to check!
2. Position the -wheel bearing in the wheel bearing housing- in the correct position. Position the T10205/7 pressure piece (from attachments T10205)
in the correct position on the wheel bearing. Insert the tubular piston cylinder vas 6178. Position the T10205/9 pressure piece (from attachments
T10205) and the 8-2 nut for threaded rod (from attachments T10205) in the correct position. Mount wheel bearing. Shortly before the stop, the
applied force will be between 35 kN and 60 kN. Do not exceed the maximum assembling force at the stop. -> assembling force: 90 KN
3. Position the -snap ring- with the opening facing downward. When the Seger ring is fitted correctly, -dimension X- is at least 15 mm. -> minimum
dimension: 15 mm If this dimension is not reached, the Seger ring must be fitted again. If necessary, carefully press the wheel bearing again.
4. Fit wheel hub (tools).
