Cayenne GTS (9PA) V8-4.8L (2008)
Control Module: Service and Repair
Removing and Installing Transfer Gear Control Unit
WM 391319 Removing and installing transfer gear control unit
Removing transfer gear control unit
Installation position of transfer gear control unit
Information
-
The control unit is located under the right front seat.
1. The ignition key must be removed before pulling the connector off the control unit.
2. Move right front seat all the way back and up.
3. Unclip right front seat trim and remove drawer.
4. Unscrew the fastening screw -arrow- for the holder.
Unscrewing fastening screw for holder
5. Move the seat all the way forward.
6. Release the two connectors -A- and pull them off -B-.