Cayenne GTS (9PA) V8-4.8L (2008)
1. Slide in hose on the right side -arrow A- and position it along the electrical wiring harness.
2. Push the hose onto the spray jets -arrow B-.
3. Press on the retaining clip -arrow C- until it locks in place.
INFORMATION: Before tightening with tie-wraps, make sure hose does not chafe on locking tabs of parking aid -B-.
4. Tighten hose with tie-wraps -arrow A- to the electrical wiring harness.
5. Press hose in until it is felt to click into place in the clips -arrows-.
Subsequent work
Installing front apron.