Cayenne GTS (9PA) V8-48L (2008) Headlamp Washer Pump Service and Repair
3. Rotate pump with high-pressure hose -Arrow A- and pull it out of tank -Arrow B-.
4. Take out the rubber gasket -C- from the tank.
5. Pull hose off the high-pressure pump.
Installing pump for headlight washer system
1. Apply a suitable rubber lubricant (tyre mounting paste) to sealing surface -Arrows A- and press rubber seal into tank -Arrow B- until it is felt to
engage.
2. Apply a suitable rubber lubricant (tyre mounting paste) to the sealing surface -Arrows A- and attach the high-pressure hose to the pump -Arrow B-.
3. Apply a suitable rubber lubricant (tyre mounting paste) to the sealing surface -Arrows A-.
4. Press high-pressure pump completely into rubber gasket -Arrow B- and rotate to the limit position -Arrow C-.
5. Press high-pressure hose into retaining tabs -Arrow A- until it is felt to engage in the tank.