Cayenne GTS (9PA) V8-4.8L (2008)
/v8-4.8l/Page-1051002.png)
2. Pull the two water lines off the pump -arrows A-.
3. Pull the pump upwards out of the tank -arrow B-.
4. Remove rubber seal -arrow B- using a removal tool, universal NR.21 to lever it out of the tank - arrow A-.
Installing pump for windscreen washer system
1. Apply a suitable rubber lubricant (tyre mounting paste) to sealing surface -arrows A- and press rubber seal into tank -arrow B- until it is felt to
engage.
2. Apply a suitable rubber lubricant (tyre mounting paste) to sealing surface -arrows A- and press pump into rubber seal -arrow B- until it is felt to
engage.
3. Connect the two water lines to the pump connections -arrows C-.
4. Connect plug to pump -arrow- until the lock is felt to engage.
