Cayenne GTS (9PA) V8-4.8L (2008)
Windshield Washer Spray Nozzle: Service and Repair
Removing and installing spray nozzle
Removing spray nozzle
1. Open the bonnet.
2. Switch off ignition and remove ignition key.
3. Disengage cover -arrow A-, disconnect the electrical plug connection -arrow B- and pull the hose connection -arrow C- apart.
4. Pull the spray nozzle downwards -arrow A- and remove from the bonnet -arrow B- along with the connections.
Installing spray nozzle
1. Insert spray nozzle along with the lines under the bonnet -arrow A- and engage -arrow B-.
2. Insert the lines through the opening, connect electrical plug connection -arrow B- and connect the water feed line -arrow A-. Position the cover
-arrow C- under the bonnet.
Adjusting spray nozzles
NOTE:
Incorrect handling of spray nozzles
-
Risk of damage to spray nozzles