porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Antenna Control Module > < Antenna Amplifier|Service and Repair
Page 2
background image

1. Undo the two fastening screws of the antenna amplifier.
2. Remove ground strap "1", and pull off all the plugs from the antenna amplifier by pressing the tabs "a".

NOTE:  The number of plugs is different for radio and PCM equipment.

Installing The Antenna Amplifier

1. Insert all electrical plugs on antenna amplifier until plugs are felt to engage.
2. Position antenna amplifier in rear spoiler, fit ground cable "1" and screw down antenna amplifier with the two fastening screws.

Install top cover of rear spoiler.

Antenna Control Module > < Antenna Amplifier|Service and Repair