porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

HomeLink(R) - Garage Door Opener Retrofit|Page 7666 > < HomeLink(R) - Garage Door Opener Retrofit|Page 7664
Page 6
background image

3.6.1 Press socket contact of line RD/GN 0.35sq out of chamber 4 (30G I) => Figure 10 -A-.

3.6.2 Crimp micro-quad lock (999.652.901.22) => Figure 11 -A- at one end of the additional electric line 0.35sq.

ATTENTION:

Do not connect additional electric line as a splice to terminal 30G II, chamber 2! 

^

Roof console Wake-up function does not work!

=> Connect garage door opener to terminal 30G I, chamber 4.

3.6 3 Connect the other end of the additional electric line 0.35sq as a splice => Figure 11 -B- to the electric line RD/GN 0.35sq from chamber 4

(30G I).

Note:

Ensure socket contact is seated securely.

3.6.4 Insert socket contact of line RD/GN 0.35sq into chamber 4 (30G I) and additional micro-quad lock into chamber 3.

3.7

Push connector housing onto the plug carrier until the lock engages.

3.8

Fasten tie-wrap.

3.9

Wind wrapping tape around wire harness.

HomeLink(R) - Garage Door Opener Retrofit|Page 7666 > < HomeLink(R) - Garage Door Opener Retrofit|Page 7664