porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 7766 > < Initial Inspection and Diagnostic Overview|Page 7764
Page 13
background image

The internal amplifier is part of the PCM2 (installed on the main board).

Lock/Unlock

Lock/Unlock

A lock occurs when the signal sent from the MMI via the wake-up/ is understood and answered by the connected MOST control units; this results in a
'lock (connection)'. The lock is maintained until the signal disappears, i.e. an 'unlock' occurs.

Man Machine Interface (MMI)

Man Machine Interface (MMI)

The MMI is part of the PCM2 (on the main board). It runs the gateway commands via the wake-up signal line and the distribution line diagnosis. If 
control units fail, this is reported to the gateway and saved there.

MOST Actual and Required Installed Components Lists

MOST Actual And Required Installed Components Lists

All MOST control units that are connected to the PCM2 are entered via diagnostic tester in the 'required installed components list'. Only the MOST
control units recorded in the MOST required installed components list are activated. An 'actual installed components list' of detected devices is written
and saved when the PCM2 is started.

MOST Switch

MOST Switch

The MOST switch is part of the PCM2. It keeps the electrical MOST closed if no other MOST control unit is optically connected to the MOST. The
MOST switch is opened when a light signal is received from the connected MOST control units.

NOTE:

-

When the PCM2 is replaced, the coding must be performed in accordance with the connected MOST control units.

-

When the 'Switch closed' parameter is set, the switch remains closed even in existing MOST control units. Communication is then not possible.

Navigation

Navigation

The navigation module is designed as a module box, which can be inserted in the PCM2 as an option. After the insertion, an electronic switch is opened
automatically and the module is integrated into the MOST ring.

PCM2 Control Unit (Head Unit)

PCM2 Control Unit (Head Unit)

The PCM2 control unit (head unit) includes the following components:

Internal:

PCM2 gateway

PCM2 Man Machine Interface (MMI)

Internal amplifier (optional, depending on the equipment)

Tuner

Single CD

Navigation (optional/insertion)

VOCS (voice control system) (optional/insertion)

Controller Area Network (CAN) Comfort

MOST switch

Initial Inspection and Diagnostic Overview|Page 7766 > < Initial Inspection and Diagnostic Overview|Page 7764