porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 7768 > < Initial Inspection and Diagnostic Overview|Page 7766
Page 15
background image

connected MOST control units and forwarded is switched on via the gateway.

PCM2 Control Module (Head Unit)

PCM2 Control Module (Head Unit)

The PCM2 control module (head unit) includes the following components:

Internal:

PCM2 gateway

PCM2 Man Machine Interface (MMI)

Internal amplifier (optional, depending on the equipment)

Tuner

Single CD

Navigation (optional/insertion)

VOCS (voice control system) (optional/insertion)

Controller Area Network (CAN) Infotainment

MOST switch

External:

External amplifier (optional, Harman or BOSE)

CD changer (CDC), (optional)

Telephone/telematics (optional)

The PCM2 consists of at least two but a maximum of four MOST nodes, (Gateway, MMI and Navigation and VOCS (optional)), which communicate
with each other electronically via the MOST. Data is transferred outside of the PCM2 via the optical MOST.

Actual Installed Components List/Required Installed Components List

Actual Installed Components List/Required Installed Components List

All MOST control units that are connected to the PCM2 are entered in the 'required installed components list'. An actual installed components list is
written and saved when the PCM2 is started.

Actual Values

Actual Values

-

Climatronic blower speed

-

Supply voltage

Initial Inspection and Diagnostic Overview|Page 7768 > < Initial Inspection and Diagnostic Overview|Page 7766