porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 7775 > < Initial Inspection and Diagnostic Overview|Page 7773
Page 22
background image

Navigation

The navigation module is designed as a module box, which can be inserted in the PCM2 as an option. After the insertion, an electronic switch is opened
automatically and the module is integrated into the MOST ring.

PCM2 Control Unit (Head Unit)

PCM2 Control Unit (Head Unit)

The PCM2 control unit (head unit) includes the following components:

Internal:

PCM2 gateway

PCM2 Man Machine Interface (MMI)

Amplifier (internal)

Tuner

Single CD

Navigation (optional/insertion)

VOCS (voice control system) (optional/insertion)

Controller Area Network (CAN) Comfort

MOST switch

External:

External amplifier (optional, Harman or BOSE)

Telephone/telematics (optional)

CD changer (CDC), (optional)

The PCM2 consists of at least two but a maximum of four MOST nodes, (Gateway, MMI and Navigation and VOCS (optional)), which communicate
with each other via the electronic MOST. Data is transferred outside of the PCM2 via the optical MOST.

Replacing CDR23 Control Modules

Replacing CDR23 Control Modules

The PCM2 is converted to delivery mode (low-current mode) in production. As known from other systems (alarm system, instrument cluster, roll-over
bar), the PCM2 must be activated with the Porsche System Tester II No. 9588.

1. Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
2. Select 'Special functions' in the Vehicle type menu and confirm with the >> key
3. Select 'Vehicle hand-over' in the Control modules menu and confirm with the >> key
4. Follow the instructions of the Porsche System Tester II No. 9588.

Ring Break Diagnosis Line

Ring Break Diagnosis Line

The ring break diagnosis is an electrical lead, which, as a stub cable, connects the individual MOST control units in the system with one another. The
existing MOST control units are checked at regular intervals during communication with the control units via the electrical/ optical MOST.

Single CD

Single CD

The CD player is part of the PCM2. It is used to update the navigation system.

Telephone/Telematics

Initial Inspection and Diagnostic Overview|Page 7775 > < Initial Inspection and Diagnostic Overview|Page 7773