Cayenne S (9PA) V8-4.5L (2003)
4. Select 'PCM2 GW' in the Cayenne PCM2 function selection and confirm with the >> key
5. Select "Identification" in the Cayenne PCM2 GW function selection and confirm with the >> key.
6. 'Diagnosis software number; PCM2 part number.' appears on the display
7. "Extended identification" can be called up on the display with the F8 key.
Gateway Input Signals
Gateway Input Signals
The following queries can be run using this menu item:
-
Available registry startup status.
-
Internal ring lock startup status.
-
External ring lock startup status.
NOTE: Deactivate the 'automatic traffic announcement' before performing the diagnosis on the PCM2. If this is not done, the diagnosis will abort
(applies only to software version < 03).
Part 1
Part 2
General Information on the Fault Memory
General Information On The Fault Memory
Fault code setting conditions
Fault codes can be set in several circumstances, e.g.: