porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Body - Running Board Installation|Page 8416 > < Body - Running Board Installation
Page 2
background image

Take a ruler and verify that the template is the correct scale. There is the possibility that during printing and/or the copier process + or - scaling
occurred. Template reference points are 150 mm X 60 mm. If your printed or copied template measurements when compared against a ruler do not
match, make printer/copier output adjustments accordingly.

Danger!

Risk of injury due to vehicles slipping or tilting off lifting platform! - caused by improper alignment of the lifting platform arms or their support
plates, as well as by raising, supporting or removing units on raised vehicles.

>

Align the vehicle evenly between the lifting platform columns.

>

Lift the vehicle only at the lifting points provided.

>

Check the correct seating of the support plates by raising the vehicle slightly and conducting a visual inspection.

>

In order to assure that the vehicle is not lifted off the support plates during assembly work, the vehicle must be secured on the lifting platform
when removing or supporting units or the shift in the center of gravity must be compensated with corresponding loads in the vehicle.

>

In addition, the guidelines of the lifting platform manufacturer and local accident prevention regulations must be observed.

Caution!

Danger of material damage - due to raising the vehicle incorrectly.

>

Lifting or supporting the vehicle at unsuitable lifting points can lead to damage to the vehicle.

>

Lift the vehicle only at the approved lift points, see owner's manual.

>

Raising the vehicle in the sill area will lead to the deformation of body parts and to leakage in the underbody area.

Materials:
1 x M8 screw x 50
1 x M10 nut
2 x M8 washer
2 m Electrical wire 1.0 sq.

Tools:
Torx screwdriver T25, T30
Filler / Scissors
Ratchet
Rivet gun for blind rivet nut M8 made of steel
Socket wrench insert a/f 10, 13
Torque wrench
Nutdriver hexagon socket a/f 5
Open-end/ring wrench, a/f 10
Approved platform lift

Work Procedure:

1.

Preparatory work.

1.1

Clean sill area of vehicle - refer to Cayenne Owner's Manual.

Body - Running Board Installation|Page 8416 > < Body - Running Board Installation