Cayenne S (9PA) V8-4.5L (2003)
6. Attaching lock actuation
6.1. Press the lock actuation -6- into the guide on the door handle -arrow F-.
7. Installing housing with lock barrel - driver's door only.
7.1. Insert vehicle key into the housing with lock barrel and push in the housing -4- (-arrow G-) while turning the vehicle key slightly to the right
at the same time. If necessary, loosen fastening screws -2 and 3- slightly until the housing with lock barrel -4- can be inserted fully.
7.2. Screw in fastening screws -2 and 3- at the side (-arrow H-) and tighten to the specified torque. Refer to Removing and installing door handle.
8. Installing housing - passenger's door only.
8.1. Slide in the housing -4- (-arrow G-). If necessary, loosen a fastening screw -2 and 3- slightly until the housing -4- can be inserted completely.
8.2. Screw in fastening screw -2- at the side (-arrow H-) and tighten to the specified torque. Refer to Removing and installing door handle.