Cayenne S (9PA) V8-4.5L (2003)
/v8-4.5l/Page-1791208.png)
passenger compartment parts are only supplied from the spare parts range as individual parts painted with decorative black paint ("B12 black grey"), i.e.
new passenger compartment parts in the color variant "C02 metal gray" must be surface-painted before assembly.
Follow the repair painting procedure for plastic components shown below:
G 8.6.4 Interior painting, soft-look paint
The soft-look paint used in the paint finish of interior parts as of the model year 2000 cannot, due its special material properties, be re-created during
repairs using the procedures available at the present time. In the event of damage, the affected vehicle parts must be replaced by new parts.
Special notes for the care of soft-look paint surfaces
CAUTION:
-
Damage to the soft-look paint coat if the cleaning agents or solvents available as accessories for cleaning the vehicle interior are used.
This also applies to the use of plastic polish 999.901.021.41 from the Porsche care set.
-
The contents of these agents etch the paint coat (paint swells, rubber-like texture). Consequently, the paint coat can separate from the
substrate when a mechanical load is applied.
