porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Body - Roof Box Installation Instructions|Page 9239 > < Body - Roof Box Installation Instructions|Page 9237
Page 8
background image

3.1

Feed the tension strap (--> Figure 12-1-) through the eyelets on the floor of the roof box (--> Figure 12-2-) or on the clamps (--> Figure
12-3-).

Fit other tension straps in the same way, if necessary.

3.2

Load the roof box and secure the load with tension straps.

Information
Make sure there is enough space between the attachment point for skis and the floor or lid (--> Fig. 12 -arrow-) of the roof box. Reposition
skis in the roof box if necessary.

3.3

Carefully close the lid of the roof box.

Information

The key can be removed only if the roof box is locked.

3.4

Lock the roof box by turning the key counterclockwise and remove the key.

Information
Please pass all this information on to the customer as well.

4

Remove the roof box from the roof transport system

4.1

Open the roof box and empty it completely.

4.2

Loosen the four M8 butterfly nuts slightly.

4.3

Open the side caps on each end of the brackets (--> Instructions for using the roof transport system and labor operation no.669223 or
Instructions for using roof rail cross bars and labor operation no.669223).

4.4

Together with a second person, carefully pull the roof box sideways out of the roof transport system brackets and remove it from the vehicle.

4.5

Lock the roof box, clean it if necessary (observe warning) and store it lying flat in a suitable location.

4.6

Close the side caps on the end of the brackets (see relevant instructions for use).

Working Times:

Body - Roof Box Installation Instructions|Page 9239 > < Body - Roof Box Installation Instructions|Page 9237