Cayenne S (9PA) V8-4.5L (2003)
/v8-4.5l/Page-1157001.png)
Brake Pad: Service and Repair
Removing and Installing the Front Disc Brake Pads
Removing and installing the front disc brake pads
Warning! Danger of accident if brake pads with the wrong brake pad quality are installed!
^
Use only the type-specific brake pads specified in the Porsche Spare Parts Catalogue!
Removal
^
Remove wheel!
^
The core of the warning contact wire must not be left exposed! Worn insulation is insignificant!
^
If necessary, remove a little brake fluid from the expansion tank by suction in order to prevent spilling when disc brake pad is pushed back!
1. Remove fastening screw at retainer pin. Subsequently screw in auxiliary screw M8. Hold down expanding springs with -a screwdriver- and remove
retainer pin.
2. Remove warning contact wire at brake caliper and expanding spring. Remove warning contacts from brake disc pads.
3. Place piston resetting fixture 144 on brake caliper between the disc brake pads and push pads back evenly -movement arrows-.
