Cayenne S (9PA) V8-4.5L (2003)
Component overview
Removing thermostat
^
Remove intake distributor.
^
All seals and O-rings must be replaced.
1. Position the vehicle at the specified points using a lifting platform.
2. Open the bonnet.
Note:
^
The coolant filled in at the factory is intended for lifetime cooling and, thus, need not be changed. This coolant must not be mixed with other
coolants.
^
Only original Porsche antifreeze should be used when changing or topping up the coolant.
3. Open maintenance cover.
Caution: Danger of scalding!