Cayenne S (9PA) V8-4.5L (2003)
10. Remove belt pulley from the crankshaft. The central screw must on no account be reused.
11. Remove oil filter bracket. To do this, unscrew the 4 fastening screws (3 x M8 x 70 and 1 x M8 x 45). Pull oil filter bracket off forwards.
Note: In the case of the Cayenne Turbo, the oil extraction pump of the turbocharger must also be removed. To do this, release screws -1 to 6- one
after the other.
12. Remove oil transfer sleeve. To do this, insert internal puller into the opening and tighten. While doing this, counter the puller with an open-ended
wrench.