Cayenne S (9PA) V8-4.5L (2003)
/v8-4.5l/Page-492003.png)
5. Connect pressure gauge on the hose and tighten it hand tight.
Note:
^
The oil temperature must range between 80°C and 100°C when performing the measurement.
^
Test the oil temperature using a special thermometer or the PST II tester.
6. Start the engine and move off at the required test speed. Read off the oil pressure on the pressure gauge when doing so.
Caution: Danger of scalding!
^
Engine oil and components of the oil circuit can become very hot!
^
Avoid contact with skin and eyes!
^
Wear suitable protective clothing!
Note: When the pressure gauge is unscrewed, approximately 0.3 L of engine oil escapes.
7. Remove pressure gauge with test hose. Collect the emerging engine oil and dispose of it in accordance with the applicable national laws.
8. Install oil temperature switch with new sealing ring.
Tightening torque: 20 Nm (15 ft. lbs.).
