Cayenne S (9PA) V8-4.5L (2003)
Air Door Actuator / Motor: Service and Repair
Heater
Installing and Removing Servo Motor
NOTE:
-
The servo motor heating -right temperature- is located in the air conditioning box on the right.
-
Before starting work turn off ignition and remove ignition key.
Removing Servo Motor
-
Remove cover under the instrument panel on the right.
-
Remove glove compartment.
NOTE: The servo motor can be accessed once the glove compartment has been removed.
1. Disconnect the plug connection on the temperature sensor.
2. Unscrew the two fastening screws -1- from the retainer plate.
3. Insert connector -2- -a- and separate plug connection.
4. Unscrew retainer plate downwards.
5. Unscrew fastening screws -A- and remove servo motor.
Installing Servo Motor
1. Position servo motor on the retainer plate and screw down with fastening screws -B-. Refer to tightening torques.