Cayenne S (9PA) V8-4.5L (2003)
6. Position bushing on the compressor, insert compressor sideways.
7. Position steering hydraulic line and compressor.
8. Tighten compressor and steering hydraulic line with the fastening screws -3- and -4-. Refer to tightening torques.
9. Do not remove the plugs for the lines and compressor connection -1- and -2- until shortly before installation.
10. Position and screw down refrigerant lines. Refer to tightening torques.
-
Installing drive belt.
-
Fill the A/C with refrigerant according to the instructions.
-
Open air vents on the instrument panel, adjust fan to at least 75%.
-
Switch on A/C after idle speed stabilization (approx. 5 sec) and allow the engine to run for at least 2 minutes without interruption with an engine
speed of 1500 Per min.
-
Switch A/C off again. Driving operations can only be interrupted after the system has been filled successfully.
-
Assemble underbody - engine cover.
-
Assemble left front wheel.
Tightening Torques