Cayenne S (9PA) V8-4.5L (2003)
18. Push on the retaining clips -A- until the clips click into place.
-
Install relay carrier. Install holder from relay carrier.
-
Install vehicle electrical system control unit.
-
Install control unit for Kessy or remove control unit for immobilizer.
-
Top up engine coolant.
19. Check the heating system for leaks.
20. Clip left cover and secure with the fastening screws. Refer to tightening torques.
-
Install the evaporator capacitor line and evaporator compressor line on the expansion valve.
-
Install the instrument panel.
-
Clip cover for instrument panel into place on left and right.
-
Install glove compartment.
-
Install cover under instrument panel on left and right.
-
Install trim strip for instrument panel.
-
Install cover under instrument panel.
-
Install the instrument panel cover.
-
Install cowl panel cover.
-
Install wiper link.
-
Fill refrigerant.
Tightening Torques